This module is programmable control, can achieve thousands of functions, stable and reliable working performance, and a built-in watchdog timer circuit, to ensure that the module for a long time to run!!!
Some of the common features are shown as follows:
- Turn on the power supply, relay 1 is closed for N seconds, and then disconnect relay 2 for N seconds.
- When the power supply is turned on, relay 1 is switched off after N seconds, and then relay 2 is closed for N seconds and then is turned off.
- The power supply is switched on, the relay 1, 2 have no action, when a signal or trigger button, relay 1 closed off after N seconds; then relay 2 closed off after N seconds, until the next trigger, repeat the same action.
- Through the signal 1, 2 programming, the control can be achieved on the relay 1 and 2 arbitrarily.
- When signal 1 has a signal, relay 1 is closed, relay 2 is disconnected; when signal 2 has a signal, relay 1 is turned off, and relay 2 is closed.
- Can be connected to the NPN sensor signal, the sensor signal programming, to achieve arbitrary control of the relay.
- When signal 1 is triggered, relay 1 is controlled, and when signal 2 is triggered, relay 2 is controlled.
- Turn on the power supply, the control motor is turning N seconds, and then reverse N seconds, followed by the cycle.
- When signal 1 has a signal, the motor is controlled to rotate; when signal 2 has a signal, the motor is reversed.
Features:
- This programmable logic controller uses an industrial-grade 32-bit MCU with strong anti-interference and faster speed.
- High-quality chip, stable performance, online download, online monitoring, automatic save when power off.
- The program is written in ladder logic programming language and supports GX-Developer and GX-work2.
- The programming port is the port for program upload, download, test, and monitor.
- It is reusable, stable, and easy to learn. The PLC transmission baud rate is 9600.
Package Includes:
1 x PLC Regulator FX2N-20MR Industrial Control Board Relay Programmable Controller
praveen.rhpws (verified owner) –
Good for non critical machine. can be programmed with Mitsubishi software.
praveen.rhpws –
Butani Chetan (verified owner) –
Very Good product in industrial use and cost effective. We can replace another branded plc by this card.
Butani Chetan –