The MT3608 2A Max DC-DC Step Up Power Module Booster Power Module is a low-cost module that can step-up a 2 to 24V input voltage up to a 5 to 28V output at up to 2A.
DC-DC boost converters step up the input voltage to a higher voltage while also stepping down the available current since the module can’t output more power than its inputs.
This boost converter is adjustable and capable of outputting a voltage in the range of 5.0 to 28V at a continuous current of up to 1.5A depending on input/output voltage settings with 1A available with most settings.
Since it is a boost converter, the input voltage must be lower than the output voltage.
The device is able to use low ESR bulk ceramic capacitors rather than electrolytic caps which avoids long-term aging concerns and contributes to the compact packaging.
The MT3608 converter IC has over-current and thermal limiting features built-in to safely shut the device down if driven too hard.
Voltage Adjustment:
The module has a single-turn potentiometer for adjustment of the output voltage.
Turning the pot CW decreases the output voltage while turning it CCW increases the output voltage.
The upper limit of the adjustment range will depend on the input voltage and the load. With a 9V input for instance, at 1A, the upper voltage limit will be approximately 20V.
Module Connections
These are compact boards with 4 solder pads for making connections.
- VIN+ = Input Voltage
- VIN- = Ground
- VOUT+ = Output Voltage
- VOUT- = Ground. Connected to VIN- on the module.
Pad dimensions:
Note:
- The input voltage should not exceed the maximum input voltage.
- Peak current output current is not more than 2A for input & output.
- Please be noted that the output voltage should be higher than the input voltage.
Note : Product may different in terms of design.
Features :
- It’s efficient by up to 93%.
- It can source a good amount of current.
- It is an inexpensive converter module.
- It’s simple to adjust to get your desired increase in voltage.
Package Include :
1Piece MT3608 2A Max DC-DC Step Up Power Module Booster.
Sparks (verified owner) –
Treat this as max 1A. It will overheat badly at 2A.
Sparks –
chandraprakash7nn (verified owner) –
Product is very good, but little bit mistake in terminal connection means death of the module. My two modules have been blown out because of that mistake, So be careful while doing the connection work.
chandraprakash7nn –
Anil kumar (verified owner) –
Same product ,nice packing , good experience
Anil kumar –
rakesh kumar (verified owner) –
nice product.
rakesh kumar –
dipum999noble (verified owner) –
Fine working at low price
dipum999noble –
manager.softcircuits (verified owner) –
works as expected with my electronics
manager.softcircuits –
gokulakannangceb (verified owner) –
It satisfies it’s need good product
gokulakannangceb –
akash.boda.bablu8519858541 (verified owner) –
Nice
akash.boda.bablu8519858541 –
AJAI KUMAR S (verified owner) –
Good and works great, original IC and the spec matches. Good boost converter board.
AJAI KUMAR S –
dharmikpatel066 (verified owner) –
my first experience with robi.in was good,nice product and fast shipping
dharmikpatel066 –
Mahesh Kumar (verified owner) –
Good products
Mahesh Kumar –
Mahesh Kumar (verified owner) –
Good product
Mahesh Kumar –
adobeadi511 (verified owner) –
a very good product love it
adobeadi511 –
Abhinay (verified owner) –
Great shopping… Product as per discussion.. reliable packing…
Abhinay –
mayurkumarchauhan19@gmail.com –
Good
mayurkumarchauhan19@gmail.com –