The TUSB2036VF is a 3-port Hub that provides up to three downstream ports in compliance with the USB 2.0 specification. Because this device is implemented with a digital state machine instead of a microcontroller, no firmware programming is required. Fully-compliant USB transceivers are integrated into the ASIC for all upstream and downstream ports. The downstream ports support both full-speed and low-speed devices by automatically setting the slew rate according to the speed of the device attached to the ports. The configuration of the BUSPWR pin selects either the bus-powered or the self-powered mode. The introduction of the DP0 pull-up resistor disable pin, DP0PUR, makes it much easier to implement an onboard bus/self-power dynamic-switching circuitry. With the new function pin, the end-equipment vendor can reduce the total board cost while adding additional product value. The TUSB2036 supports both bus-powered and self-powered modes.
Specifications:
IC Case / Package: LQFP
Operating Temperature Min: 0°C
No. of Pins: 32Pins
USB Standard: USB 2.0
Data Rate: 12Mbps
No. of Ports: 3Ports
USB IC Type: USB Hub Controller
Package Includes:
1 x TUSB2036VF-TEXAS INSTRUMENTS-TUSB2036VF-USB Interface, USB Hub Controller, USB 2.0, 3 V, 3.6 V, LQFP, 32 Pins
There are no reviews yet.